based upon your mounting natural environment, you may want to safe the MR55 to its mount place. Your MR55 might be secured in numerous means. If the MR55 continues to be put in using the mount cradle, it should be secured by way of safety screw (Torx stability screws are provided) and/or Kensington lock. If your mount cradle was not utilized, the MR55 can still be secured using a Kensington lock

The MR55 attaches for the mount cradle with two tabs over the cradle that insert into the MR55, which is secured towards the cradle making use of 1 screw.

Your MR55 is equipped which has a multi-shade LED gentle over the front of the device to convey information regarding program features and general performance:

The MR55 may be operated in “Run dim” manner For extra stability and also to lessen the visibility from the entry position. In this method, the LED will not be illuminated. This method may be enabled by means of Meraki dashboard.

The MR55 could be placed on a desk or shelf resting over the non-scratch rubber feet. The mount cradle will not be needed for a desk or shelf set up.

The bundled mount cradle template reveals the hole patterns that should be useful for Each individual kind of mount.

If the button is pressed and held for at least five seconds and then released, the MR55 will reboot and be restored to its first manufacturing unit configurations by deleting all configuration details stored about the device.

When making use of DHCP, the DHCP server ought to be configured to assign a static IP deal with for every MAC address belonging to some Meraki AP. Other functions of the wi-fi network, like 802.1X authentication, could trust in the property that the APs have static IP addresses.

The MR55 will turn on as well as LED will glow reliable orange. Should the device won't demand a firmware upgrade, the LED will turn both green (no customers connected) or blue (clients linked) in just 30 seconds.

Configure the static IP deal with, net mask, gateway IP tackle and DNS servers this AP will use on its wired connection.

If needed, configure a static IP through the regional position web page to permit it to communicate with the Meraki dashboard.

We advise updating the application driver for the wireless NIC on your own client machine Should the shopper is not able to see the configured SSIDs. Alternatively, it is possible to disable AX operation for two.4GHz and 5GHz bands employing RF profiles. 

The MR55 mount cradle can be used to setup your obtain level in a wide range of scenarios: wall or solid ceiling, under a fall ceiling, on numerous electrical junction bins.

connect the T-rail clips for the T-rail by rotating them and snapping them into spot as proven. The black foam pads should be compressed a bit soon after set up.    

If getting used within a mesh deployment, the MR55 should have line of sight to at the here very least two other Meraki products. A Cisco companion may help be sure that your AP placement is good.